Long Tail Tubular Cast-on

button for patreon

All of the free patterns and tutorials on this website are supported by my amazing Patreons! If it wasn’t for them I wouldn’t be able to continue to produce or host freebies. We’d love to have you join us and in return, you get exclusive behind-the-scenes material, member-only discounts and early access to new free content. Membership starts at $1 per month. You can also say thanks for the freebie via the Tip Jar.

This method of casting on is absolutely perfect for ribbed brims and edges – the cast-on merges into the ribbing seamlessly, and creates the ideal stretchy edge.

There are a number of different ways to work a tubular cast-on, and different varieties of each. The one we’re focusing on here is quick, doesn’t need waste yarn, and works well for patterns knit in the round. This method is sometimes known as the longtail tubular cast-on, or the two strand tubular cast on.

1) Using a size smaller needle than required, make a slip knot and slip it onto your needle, leaving a free end that’s approximately 3.5 times the length of the desired piece. You want to keep both yarns in one hand, and the ends will be tensioned by your first finger and thumb, as shown in this photo. Ideally, the loose tail end should be around your thumb, and the ball end over your first finger.
2) Using your wrist to move the needle whilst keeping the yarns under tension, gently swing the needle up, over and then back under the top yarn.
3) Next, bring the needle over, down then under the lower yarn and bring it under the top yarn.
4) The first stitch has been created!
5) To create the second stitch, we’ll start with the bottom yarn – this time the movement will be the opposite way round. Swing the needle over and in front of the bottom yarn, then under and up again.
6) In the same swing of the needle, take the needle over, behind, then under the top yarn and bring it under the bottom yarn – the second stitch has been made. Continue in this manner, working steps 2 to 6 to create the desired number of cast-on stitches. I use a little mantra: ”over, under, under, over” to help me keep the rhythm.

7) Once you have cast on the required number of stitches, tie a gentle knot with the two yarn ends – don’t make it tight because you’ll want to undo it later – it’s there simply to stop the stitches unravelling when you work the first row.
8) Starting with a knit stitch, work 1 by 1 rib across the stitches. You’ll want to straighten the stitches, so if your knit stitches look twisted, knit into the back of them.
Many tutorials recommend slipping the purl stitches (with the yarn in front) for the first row or two – the point of using a smaller needle than desired is to keep the edge tight and springy, rather than loose and saggy, and slipping the purl stitches has the same effect as using a smaller needle. If you know your yarn has little natural elasticity and stretches a lot, you could slip the purl stitches on the first row, as well as using a smaller needle. If you don’t have a smaller needle, slipping the purls will keep the edge neat.

When you have completed the second row, this method of tubular cast-on is ready to join in the round. If you find you have one extra stitch than desired (the slip knot counts as a stitch!) knit it together with the first stitch of the next round, to help close the gap.

Support

As always, if you have a question about this technique or need some help with it, leave a comment below! I’m afraid I’m unable to offer help via email or private message, but you’re welcome to post in our forum.

 

Print This!

If you’d like to print this free tutorial, either use the ‘Print’ button below or right-click in your browser, adjust the settings to suit your needs, and select ‘Save as PDF’ for a digital copy, or your printer for a paper copy. You can use the scale option to reduce or enlarge the font.

Woolly Wormhead

Woolly Wormhead is an internationally reknowned knit designer, specialising in Hats, technique and construction. Their patterns and techniques have been used by thousands of knitters worldwide. Join The Woolly Hat Society to be the first to learn of their latest projects and special offers!

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *