Repairing a German Short Row
May 19, 2023 | Free Tutorials, Learn It With Woolly, Short Row Colorwork

My amazing Patreons support all of my free patterns, tutorials and workshops! If it weren’t for them, I wouldn’t be able to keep producing or hosting freebies. We’d love to have you join us, and in return, you get exclusive behind-the-scenes material, member-only discounts, early access to new free content and more. You can also say thanks for the freebie via the Tip Jar.
Occassionally you may drop a German short row, or if you’re working a short-row colourwork pattern, may need to unpick your work and find a GSR doesn’t behave when unravelled. If this happens, you can repair your German short-row without needing to undo all your work!
A couple of the steps are a little fiddly, and it may take some practice at getting it right, but I promise it’s a lot quicker than unpicking all your work and re-knitting. It’s a very satisfying skill to have!
1) A dropped German short row will look similar to this; it has separated into two parts on the left-hand needle.
One part, sitting to the left, is the undone short-rowed stitch, which is technically from the previous row.
The other part, to the right and attached to the first stitch on the right-hand needle, is the short-row loop that resulted from creating the double-legged stitch – this loop is what’s left of the ‘disappeared stitch’, i.e. the stitch we knit to create the GSR then pulled really tight to stretch the double-legged stitch over the needle.
2) The first step is to lift the short-row loop off the left-hand needle by inserting the right-hand needle knitwise to twist it towards the back, before replacing it on the left-hand needle.
This step is not critical; the short row will look almost the same when you knit across it, but twisting it does help ensure the double-legged stitch sits correctly on the needle, and it will tighten up the repair and maintain a better tension.
9) Here is a fresh German short row for comparison.
In Step 8 the double-legged stitch, which is anchored at the back of the work, still comes over the needle where it connects to the loop from the ‘disappeared stitch’. The loop is anchored at the correct points; if you don’t twist the loop in Step 2 this part won’t be as clear.
The repaired GSR might look looser than this GSR, but that will even out. Every stitch when dropped and repaired changes in tension, and short rows are no different. The change in tension might mean that the double-legged stitch isn’t as close to the right side of the work as it was, but it’s still there.
Support
As always, if you have a question about this technique or need some help with it, leave a comment below! I’m afraid I’m unable to offer help via email or private message, but you’re welcome to post in our forum.
Print This!
If you’d like to print this free tutorial, either use the ‘Print’ button below or right-click in your browser, adjust the settings to suit your needs, and select ‘Save as PDF’ for a digital copy, or your printer for a paper copy. You can use the scale option to reduce or enlarge the font.



















Oh how I wish I had known how to do this years ago. It would have saved me hours of unravelling.
Thank you very much.
You’re most welcome, I’m glad it’s helpful!
The best help. Brilliant thank you so much. A lot of time has been spared. And I will keep this technique.
great – I’m glad it’s helpful! Being able to repair a GSR saves so much time, and it’s pretty nifty too!
I am so grateful to find a tutorial that isn’t a video. I’m crying with joy!
I have a LOT of photo tutorials here! 🙂